List Of Modules
The following table lists the management and traffic modules for the BTI7800. Traffic modules refer to all modules that carry user traffic, and include service modules, BTI Interface Cards, and passive rack-mounted modules.
Table 1: BTI7800 Series Management and Traffic Modules
Chassis Management Module 1 (CMM1)
Provides management and control of the system.
Universal Forwarding Module (UFM3)
Supports two BICs.
Universal Forwarding Module with Integrated 100G Coherent MSA XCVR (UFM4)
Contains one 100G Coherent MSA XCVR and supports one BTI Interface Card (BIC).
Universal Forwarding Module with Integrated 400G Coherent MSA XCVR (UFM6)
Contains a total of ten client ports and one 400G Coherent MSA XCVR.1
96-Channel Amplifier (AMP1)
Provides DWDM composite signal amplification in point-to-point applications.
Note: This module is not supported on the BTI7801.
Wavelength Protection Switch (WPS4)
Provides revertive or non-revertive wavelength protection switching.
12x SFP+ BTI Interface Card (12x SFP+ BIC)
For up to 12 SFP+ transceivers.
1x CFP BTI Interface Card (1x CFP BIC)
For 1 CFP transceiver.
96-Channel Fixed Mux/Demux (FMD96)
Provides local fixed grid access to all 96 wavelengths in the DWDM 50-GHz channel plan.
1 Client ports 1 to 10 support QSFP+ transceivers and client ports 1, 2, 6, 7 support both QSFP+ and QSFP28 transceivers.