Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Critical Site Warnings and Requirements

 Warning

You must observe the site and safety requirements in this section to ensure safe operations and proper performance of BTI7800 Series equipment.

Note

Restricted Access refers to an inaccessible location that is normally inaccessible by the general public by means of any administrative or engineering control measure, but is accessible to authorized personnel who might not have laser safety training.

Table 1: Environmental Site Requirements

Site Criteria

 

Requirements

Location

 

BTI7800 equipment must be installed in a Restricted Access Location in the Central Office (CO) of Network Telecommunication Facilities.

The chassis should be installed where personnel cannot interfere with cables and cords connected to the chassis.

The chassis should be installed where cables and rack location do not obstruct chassis ventilation openings.

Electrical

BTI7814 (BT8A78CH14)

See the electrical requirements in BTI7814 Power.

BTI7802 (BT8A78CH2-I02)

See the electrical requirements in BTI7802 Power.

BTI7801 (BT8A78CH1)

See the electrical requirements in BTI7801 Power.

Electrostatic

 

Always use ESD grounding devices when handling components.

Humidity

 

5% to 95% non-condensing

Operating temperature

BTI7814 (BT8A78CH14)

15°C to +32°C; 59°F to +89.6°F

BTI7802 (BT8A78CH2-I02)

BTI7801 (BT8A78CH1)

Storage temperature

 

-40°C to +70°C; -40°F to +158°F

Be familiar with the electrical and occupational safety guidelines for your country, for example:

  • In the United States, reference the latest edition of The National Electrical Code (NEC), and the latest guidelines of the U.S. Department of Labor, Occupational Safety & Health Administration (OSHA).

  • In Canada, reference the latest edition of The Canadian Electrical Code (CEC), and the latest guidelines of the Canadian Centre for Occupational Health and Safety (CCOHS).