Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Installation Rules for the 100G Coherent CFP

 

The following rules must be followed when installing the 100G Coherent CFP (BP3AMCTL, CFP-100GBASE-CHRT) in a BTI7814 chassis.

Table 1: Installation Rules for the 100G Coherent CFP in a BTI7814 Chassis

Rule

Description

Placement within the UFM

The 100G Coherent CFP must be installed in a BIC in BIC slot 2 of the UFM (lower slot of the UFM when viewed vertically).

Placement within the chassis

The UFM with the 100G Coherent CFP must be installed to the immediate right of a fully occupied slot, or in slot 1 (leftmost slot) of the chassis. A fully occupied slot is a slot that contains a module. If that module is a UFM, then that UFM must have BIC modules in all of its BIC slots.

Note

Failure to comply with these rules might lead to adverse thermal behavior and premature failure.