proNX Optical Director
Help Center User GuideRelease Notes
User Guide
Release Notes

Logging in to the proNX Optical Director

Before You Begin



Use this procedure to log in to the proNX Optical Director.

  1. Point your browser to the following URL:

    You configure the virtual IP address and associated hostname for the cluster when you install the proNX Optical Director software.

    The virtual IP address (and hostname) allows you and the devices under management to communicate with the proNX Optical Director using an IP address that remains fixed even if the master node changes within the cluster.

    The proNX Optical Director login page appears:

  2. Type your username and password and click Sign in.

    When you log in, you are automatically placed in the dashboard.

    Note The default username is admin and the default password is admin. If this is the first time you are logging in, be sure to change the password from the default. For information on changing the password, see Changing Your (Local) User Password.

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      

Additional Comments

800 characters remaining

May we contact you if necessary?


Need product assistance? Contact Juniper Support