proNX Optical Director
Help Center User GuideRelease Notes
 
X
User Guide
Release Notes
Contents  

About the Topology Create Link Page

To access this page, click the Network tab and select Topology>Create Link in the left-nav bar.

This page displays fields that you fill in to create a link in your network.

Tasks You Can Perform

You can create links from this page.

Field Descriptions

Table 34 explains the fields in the Topology Create Link page.

Table 34: Fields in the Topology Create Link Page

Field

Description

Source1

 

Site

The site of the source endpoint of the link.

 

Device

The name of the ROADM device at the source site. This is conceptually the ROADM node.

 

Circuit Pack

This can be one of the following at the source site:

  • the name of the ROADM element within the ROADM node if the link is being created between ROADM elements, or
  • the name of the circuit pack on the tail facility endpoint if the link is being created for the tail facility
 

Port

The port on the above Circuit Pack at the source site.

Destination1

 

Site

The site of the destination endpoint of the link.

 

Device

The name of the ROADM device at the destination site. This is conceptually the ROADM node.

 

Circuit Pack

This can be one of the following at the destination site:

  • the name of the ROADM element within the ROADM node if the link is being created between ROADM elements, or
  • the name of the circuit pack on the tail facility endpoint if the link is being created for the tail facility
 

Port

The port on the above Circuit Pack at the destination site.

1 The source and destination assignments are used only to distinguish between the two endpoints and can be assigned arbitrarily.

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit