proNX Optical Director
Help Center User GuideRelease Notes
 
X
User Guide
Release Notes
Contents  

About the Topology Create Link Page

To access this page, click the Network tab and select Topology>Create Link in the left-nav bar.

This page displays fields that you fill in to create a link in your network.

Tasks You Can Perform

You can create links from this page.

Field Descriptions

Table 32 explains the fields in the Topology Create Link page.

Table 32: Fields in the Topology Create Link Page

Field

Description

Source1

Site

The site of the source endpoint of the link.

Device

The name of the ROADM device at the source site. This is conceptually the ROADM node.

Circuit Pack

The name of the ROADM element within the ROADM node at the source site.

Port

The port on the ROADM element within the ROADM node at the source site.

Destination1

Site

The site of the destination endpoint of the link.

Device

The name of the ROADM device at the destination site. This is conceptually the ROADM node.

Circuit Pack

The name of the ROADM element within the ROADM node at the destination site.

Port

The port on the ROADM element within the ROADM node at the destination site.

1 The source and destination assignments are used only to distinguish between the two endpoints and can be assigned arbitrarily.

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit