Rediscovering a Device
Procedure
Use this procedure to rediscover a device or multiple
devices.
Rediscovering a device causes the proNX Optical Director to refresh its view
by performing a full data retrieval from the device. You do not normally
need to rediscover a device because the proNX Optical Director regularly synchronizes
with all devices under management. However, if you suspect the proNX Optical Director has
a stale view of a device, you can rediscover it to speed up the synchronization.
- You can rediscover a single device, multiple devices,
or all devices at a site.
- To select all devices at a site, start from the Devices
Configuration page, categorize the device tree by site, and click
the site that you want to rediscover.
- To select a single device, start from the Devices Configuration
page, expand the device tree to see the list of devices, and click
the device that you want to rediscover.
- To select multiple devices, once you select a single device
or site, use the Ctrl key (Cmd key in Mac OS X) to multi-select other
devices or sites. You can select a combination of sites, a combination
of devices, or a combination of sites and devices.
- Once you have selected the devices you want to rediscover,
click Discovery>Re-discover Selected. To monitor the progress
of this task, see Viewing the Tasks List.
Help us to improve. Rate this article.
Feedback Received. Thank You!