proNX Optical Director
Help Center User GuideRelease Notes
 
X
User Guide
Release Notes
Contents  

About the Site Operations Backup Page

To access this page, start from the Devices Configuration page, categorize the device tree by site, and click the site that you want to back up. This places you in the Site Config page. From here, select Operations>Backup.

The Site Operations Backup page displays the list of devices that you can back up from the selected site.

Tasks You Can Perform

You can back up the configuration database for all devices found at the selected site.

Note: You can only back up devices that can support the same file transfer protocol (FTP or SFTP). If some devices at the site can only use FTP while others can only use SFTP, then you must back up each device individually. See About the Device Operations Backup Page.

Field Descriptions

The following table explains the fields in the Device or Site Operations Backup page.

Table 10: Fields in the Device or Site Operations Backup Page

Field

Description

Device

See Fields on the Site Devices Page.

Model

See Fields on the Site Devices Page.

Vendor

See Fields on the Site Devices Page.

Software Version

See Fields on the Site Devices Page.

File Server

The file server where you want to upload the backed-up configuration database.

Note: If you are backing up all devices at a site and some devices only support FTP while others only support SFTP, then you will not be able to select a file server. You will need to back up these devices individually.

Backup File

The backup file name suffix.

The backup file name is automatically constructed from the device’s IP address followed by the specified suffix, as shown:

<device-ip>-<suffix>

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit