About the Current Alarms Page

To access this page, click the Monitor tab and then select Alarms>Current from the left-nav bar.

The Current Alarms page displays the table of outstanding alarms in your network. You can filter the table to see alarms for a specific device or a subset of devices, and you can acknowledge an alarm. Acknowledging an alarm allows you to indicate to other users that this alarm is being addressed.

Tasks You Can Perform

You can perform the following tasks from this page:

View current alarms in the network or on a device.
Acknowledge or unacknowledge alarms.

Field Descriptions

Table 3 explains the headings in the Current Alarms page.

Table 3: Fields for the Current Alarms Page

Field	Description
Device	The IP address of the device.
Description	The alarm description as reported by the device for alarms generated by the device or as provided by the proNX Optical Director for alarms generated by the proNX Optical Director.
Source	The component that raised the alarm.
Time Raised	The date and time when the alarm was raised, in the following format: YYYY-MM-DD HH:MM:SS ZZZZ YYYY is the year MM is the month DD is the day HH is the hour MM is the minute SS is the second ZZZZ is the time zone represented as a UTC offset (for example, Eastern Daylight Time is specified as -0400)
Severity	Critical, major, or minor. For alarms raised by the TCX Series elements, the following definitions apply: Critical - service-affecting hardware failure Major - service-affecting abnormal condition Minor - non-service-affecting abnormal condition

Help us to improve. Rate this article.

Feedback Received. Thank You!

Current Alarms

Viewing Current Alarms