Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

View Device Statistics and Inventory information

 

You can use the Device-Name page to view statistics, inventory and the configuration templates assigned to the device.

To access this page:

  1. Select Configuration > Devices.

    The Device page appears.

  2. Click a device in the Device Name column of the Devices list.

    The Device-Name appears displaying the Overview, Inventory, and Configuration Template tabs.

View Device Statistics

To view the device statistics, click the Overview tab on the Device-Name page to view information about the device. The overview tab displays the Chassis View and the widgets listed in Table 2.

You can view the following information on the Overview tab of the <device-name> page:

  • The Chassis View, present at the top of the Overview tab, displays the device ports as icons. Hover over the ports icon to view the details, such as input and output bandwidth, port mode, negotiated speed, input and output errors, and admin status of the port.

    For a Virtual Chassis, Chassis Cluster, or dual Routing Engine, the member devices are listed on the left side of the chassis view. Clicking the member devices displays the ports of the member device.

    Note

    You cannot view the chassis view for a Cisco-IOS XR device.

    At the top of the Chassis view, system meters are provided to display data about functioning of the device components such as CPU, memory, storage and fan. If data is not collected for the system meters (for example, due to issue with telemetry manager service), dummy data is displayed.

    Table 1 lists the system meters present on the top right-corner of the Chassis View.

    Table 1: Widgets on the Overview Tab

    System Meter

    Description

    CPU

    Displays the percentage of CPU utilized and that is idle in the device

    Memory

    Memory (in %) utilized in the device.

    Storage

    Storage space (in %) allocated to the logical partitions of the device (/, /var, and /temp)

    Note: The data displayed for storage is dummy data for all devices.

    Fan

    Details of fans present in the device.

    Temperature

    Temperature of the FPCs in the device.

  • The widgets display information related to port status, general device details, alarms, and resource utilization.

    Table 2 describes the widgets on the Overview tab.

    Table 2: Widgets on the Overview Tab

    Widget

    Description

    Port Count by Status

    Graphical representation (Donut chart) of the port status.

    Hover over the chart to view the number and percentage of ports that are up and down.

    Click the More Details link (at the bottom, right-corner of the widget) to view the hardware and the interface details on the Inventory tab of the Device-Name page.

    Recent Alarms

    Lists the major, minor, and normal alarms generated recently on the device. Click the Show All link (at the top, right-corner of the widget) to view information about alarms generated during the past 1 hour, 8 hours, 1 day, 1 week, and 1 month.

    Click the View all alarms link to view the alarms on the Alarms page.

    Device Details

    Displays general details such as serial number, device platform, device family, OS version, management status, and configuration status of the device.

    Resource Utilization

    Graphical representation of memory and CPU utilized in the device for the selected time period (past 1 hour, 8 hours, 1 day, 1 week, and 1 month).

    Note: Resource utilization widget is not displayed for Cisco IOS XR devices.

You can perform the following actions from the Overview tab:

  • View only specific widgets—Click the More Options icon (vertical ellipses) on the right side of the page. Select the check boxes corresponding to the widgets that you want to view.

    Only the widgets that you selected appear on the Overview tab.

  • Refresh data on the widgets—To obtain the most current device data and statistics, click the Refresh icon (circular arrow) on the right side of the page.

    The data on the widgets is refreshed.

View Device Inventory

To view inventory of a device, click the Inventory tab on the <Device-Name> page. A device inventory comprises hardware components (Chassis, FPC, PIC, and Interfaces) and software components (Licenses, Features, and Software).

Paragon Automation displays the inventory of a device containing data retrieved from the device during discovery and resynchronization operations. This inventory includes the number of available slots, power supplies, chassis cards, fans, part numbers, and so on. Sorting is disabled on the Chassis tab to preserve the natural slot order of the devices.

Paragon Automation displays the inventory information for primary and the member devices for dual Routing Engines, Chassis Clusters, and Virtual Chassis.

Note
  • For Juniper Networks devices, the inventory is synchronized whenever a change in the components is indicated in the device syslog.

  • For Cisco-IOS XR devices, you must manually synchronize to retrieve the latest inventory information.

The inventory tab displays the following information:

  • Chassis—View the hierarchical list of all the hardware components present on the chassis, and the associated physical interfaces and logical interfaces. Table 3 describes the fields displayed on the Chassis tab.

  • Interfaces—View details of the interfaces present on the chassis, line card, FPC, and MICs. Table 4 describes the fields displayed on this tab.

    You can perform the following functions on this tab:

    • Change the administration status of an interface by selecting the interface and clicking More > Change Admin Status.

      A message indicating the change in the admin status is initiated is displayed along with the job ID. Click the link job ID link to view the progress of the job on the Jobs page (Monitoring > Jobs). The admin status is changed after the job completes successfully.

    • View the following details of an interface, as widgets, by clicking on the interface link:

      • General details, such as the port name, IP address, admin status, link status, and so on of the interface.

      • Bandwidth consumed by the interface for the previous 1 hour, 8 hours, 1 day, 1 week, and 1 month.

      • Errors that occurred on the interface during the previous 1 hour, 8 hours, 1 day, 1 week, and 1 month.

  • Licenses—View details (such as the license version, validity type, and start and end dates) of the licenses installed on the device. Table 5 describes the fields on this tab.

    Note

    You cannot view the License information for Cisco IOS XR devices.

  • Features—View details (such as feature name, validity type, and licenses) of the features that are configured on the device. Table 6 describes the fields on this tab.

  • Software—View details (such as software name, version, and state) of the software installed on the device. Table 7 describes the fields on this tab.

  • On all the tabs, click the Show or Hide Columns icon and select the check boxes corresponding to the columns that you want to view.

    If you want to revert to the default column selections, click Reset Preferences. The selections that you previously made are cleared, and the default columns are displayed.

Table 3 describes the fields on the Chassis tab.

Table 3: Fields on the Chassis Tab

Field

Description

Module

Name of the hardware component (chassis, FPC, MIC, midplane, and so on).

Type

Type of the hardware component—Chassis, line card, CPU, backplane, and so on.

Version

Version of the hardware component.

Part Number

Part number of the hardware component. Built-in indicates that the PIC is a part of the parent component and does not have a part number.

Serial number

Serial number of the hardware component.

Physical Interfaces

Click the View link displayed in this column to view the physical interfaces associated with the hardware component. You are directed to the Interfaces tab. See Table 4 for details.

Description

Brief description of the hardware component.

Table 4 describes the fields on the Interfaces tab.

Table 4: Fields on the Interfaces Tab

Field

Description

Interface Name

Name of the interface.

You can click an interface name to view more information (such as additional details, bandwidth, and errors) on the widgets that appear. Click the Interface link present above the widgets to return back and view the list of all the interfaces on the device.

ifIndex

The SNMP object identifier.

MAC Address

MAC address of the interface.

Admin Status

Administration status of the interface—Up or Down.

Operational Status

Operational status of the interface—Up or Down.

MTU

Maximum transmission unit (MTU) size (in bytes) on the interface.

Speed

Interface speed in Mbps or Gbps.

Duplex Mode

Indicates if the duplex mode on the interface is full-duplex or half-duplex.

Link Type

Type of link provided by the interface.

Example: Ethernet, Fast Ethernet

Line card

The line card number in which the interface is present.

Logical Interfaces

Number of logical interfaces associated with the physical interface.

Click the number displayed in the column to view the logical interfaces and their details. The details are displayed on the Logical Interfaces page.

Table 5 describes the fields on the Licenses tab.

Table 5: Fields on the Licenses Tab

Field

Description

License Name

Name of the license.

Version

Version of the license.

State

State of the license:

  • Valid: The installed license key is valid.

  • Invalid: The installed license key is invalid.

  • Expired: The license key is expired.

Validity Type

Validity type of the license:

  • Databased: License expires on end date.

  • Permanent: License never expires.

  • Countdown: License expires when time remaining is zero

  • Trial: License expires at the end of the trial period.

Start Date

Start date of the license.

End Date

End date of the license.

Features

Features that the license supports.

Table 6 describes the fields on the Features tab.

Table 6: Fields on the Features Tab

Field

Description

Feature Name

Features available on the device.

Description

Brief description of the feature.

Used Count

Number of licenses currently being used on the device. Usage is determined by the configuration on the device. If a feature license exists and that feature is configured, the license is considered used.

Installed Count

Number of licenses installed on the device for the particular feature.

Need Count

Number of licenses required for legal use of the feature. Usage is determined by the configuration on the device:

Validity Type

Validity type of the license.

  • Databased: License expires on end date.

  • Permanent: License never expires.

  • Countdown: License expires when time remaining is zero

  • Trial: License expires at the end of the trial period.

Licenses

Number of licenses installed for the feature.

Table 7 describes the fields on the Software tab.

Table 7: Fields on the Software Tab

Field

Description

Software Name

Name of the software running on the device.

Software Description

Brief description of the software.

Version

Software version.

State Type

The type of the component. The value is always set to Software Component.