Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring Unified Access Control (NSM Procedure)

    Unified Access Control (UAC) includes configuring infranet controllers and traceoptions.

    To configure the UAC feature:

    1. In the NSM navigation tree, select Device Manager > Devices.
    2. Click the Device Tree tab, and then double-click the device for which you want to configure the UAC feature.
    3. Click the Configuration tab. In the configuration tree, select Services > Unified Access Control.
    4. Configure the options as specified in Table 1.
    5. Click one:
      • OK—Saves the changes.
      • Cancel—Cancels the modifications.
      • Apply—Applies the UAC options.

    Table 1: UAC Configuration Details

    OptionFunctionYour Action

    Comment

    Specifies the comment for the UAC.

    Enter a comment.

    Timeout

    Specifies (in seconds) the timeout for the idle infranet controller link.

    Enter the timeout in seconds. Range: 2 through 4,294,967,295.

    Interval

    Specifies (in seconds) the heartbeat interval from the infranet controller.

    Enter the heartbeat interval in seconds. Range: 1 through 4,294,967,295.

    Timeout Action

    Specifies the action to be performed when an infranet controller timeout occurs.

    Select the timeout action.

    Test Only Mode

    Allows all traffic and log enforcement result.

    Select the check box.

    UAC includes configuring the following topics:

    Configuring Infranet Controller (NSM Procedure)

    This section describes how to configure infranet controller for UAC.

    To configure infranet controller options:

    1. In the NSM navigation tree, select Device Manager > Devices.
    2. Click the Device Tree tab, and then double-click the device for which you want to configure infranet controller options.
    3. Click the Configuration tab. In the configuration tree, select Services > Unified Access Control > Infranet Controller.
    4. Add or modify the settings as specified in Table 2.
    5. Click one:
      • OK—Saves the changes.
      • Cancel—Cancels the modifications.
      • Apply—Applies the infranet controller options.

    Table 2: Infranet Controller Configuration Details

    OptionFunctionYour Action

    Name

    Specifies the name of the infranet controller.

    Enter a name.

    Comment

    Specifies the comment for the infranet controller.

    Enter a comment.

    Address

    Specifies the infranet controller IP address.

    Enter the IP address.

    Port

    Specifies the infranet controller port.

    Enter the port number. Range: 1 through 65535.

    Interface

    Specifies the outgoing interface.

    Enter an interface.

    Password

    Specifies the infranet controller server password.

    Enter the password.

    Server Certificate Subject

    Specifies the subject name of the infranet controller certificate to match.

    Enter the server certificate subject.

    infranet-controller > Ca Profile

    Ca Profile

    Specifies the certification authority profile.

    Select the required profile from the Non-members list and click Add to move the profiles to the Members list.

    Configuring Traceoptions (NSM Procedure)

    This section describes how to configure traceoptions for UAC.

    To configure traceoptions:

    1. In the NSM navigation tree, select Device Manager > Devices.
    2. Click the Device Tree tab, and then double-click the device for which you want to configure the traceoptions feature.
    3. Click the Configuration tab. In the configuration tree, select Services > Unified Access Control > Traceoptions.
    4. In the Traceoptions workspace, enter a comment for the traceoptions.
    5. In the configuration tree, select Services > Unified Access Control > Traceoptions > Flag.
    6. Add or modify settings as specified in Table 3.
    7. Click one:
      • OK—Saves the changes.
      • Cancel—Cancels the modifications.

    Table 3: Traceoptions Configuration Details

    OptionFunctionYour Action

    Name

    Specifies the flag name.

    Select a name.

    Comment

    Specifies the comment for the flag.

    Enter a comment.

    Published: 2013-01-06