Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring Adaptive Services PICs (NSM Procedure)

    The Adaptive Services (AS) and Multiservices PICs provide adaptive services interfaces, which allow you to coordinate multiple services on a single PIC by configuring a set of services and applications. The AS and Multiservices PICs offer a special range of services you configure in one or more service sets.

    To configure adaptive services PICS in NSM:

    1. In the navigation tree select Device Manager > Devices.
    2. In the Devices list, double-click the device to select it.
    3. In the Configuration tab, expand Services.
    4. Select Adaptive Services.
    5. Add or modify the settings as specified in Table 1.
    6. Click one:
      • OK—To save the changes.
      • Cancel—To cancel the modifications.

    Table 1: Adaptive Services Pics Configuration Details

    TaskYour Action

    Configure adaptive services or Multiservices PIC tracing operations.

    1. Click Traceoptions next to Adaptive Services Pics.
    2. Select the No Remote Trace check box to disable remote tracing.
    3. Expand Traceoptions.
    4. Click File next to Trace Options.
    5. In the Comment box, enter the comment.
    6. In the Filename box, enter the name of the file to receive the output of the tracing operation.
    7. In the Comment box, enter the comment.
    8. In the Size box, enter the maximum size of each trace file in kilobytes (KB), megabytes (MB) or gigabytes (GB).

      Range: 2 through 1000 files

      Default: 3 files

    9. From the Files list, select the maximum number of trace files.
    10. Select one of the following:
      • no-world-readable—To allow any user to read the log file.
      • world-readable—To prevent any user from reading the log file.
    11. Click Flag next to Trace Options.
    12. Click Add new entry next to flag.
    13. From the Name list, select a tracing operation to perform.
    14. In the Comment box, enter the comment.

    Published: 2013-01-02