Configuring BGP Networks
Use the BGP network settings to change the route attributes generated by BGP. For each route you want to change, create a new network entry that contains the IP address and netmask for the network reachable from the BGP routing instance. Next, configure the new route attributes for that network. On devices running ScreenOS 6.3, BGP network supports IPv6. The BGP network settings are displayed in Table 1.
Table 1: BGP Network Settings
Check Route Availability
Configure how BGP determines route availability for this route:
Configure Route Attributes (ScreenOS 5.1 and later only)
Configure how BGP determines the route attributes for the specified route: