Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring the Client (NSM Procedure)

    To set up the client, you select the primary and backup server you want this client to synchronize with.

    To configure the client:

    1. In the NSM navigation tree, select Device Manager > Devices. Click the Device Tree tab, and then double-click the Secure Access device for which you want to configure the client.
    2. Click the Configuration tab, and select System > Configuration > User Record Synchronization > This Client.
    3. Click New. The New LAS to Server mapping page appears.
    4. Select the LAS name you want to synchronize from the Logical Authentication Server Name (or ’Any LAS’) list.
    5. Enter the primary IP address of the user record server that will synchronize the user records in the Primary Server box. If you prefer to synchronize with any available server, select Logical Authentication Server Name (or ’Any LAS’).
    6. Enter a backup server IP address in the Backup Server. Click OK.

      Even if you select Logical Authentication Server Name (or ’Any LAS’), you must enter a primary server IP address. Once added, the primary and backup servers have a colored icon next to their name indicating their connection status.

    7. Click OK to save the changes.

    Published: 2013-01-03