Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring Dial-in Options on a Dialer Interface (NSM Procedure)

    To configure dial-in options on a dialer interface:

    1. In the NSM navigation tree, select Device Manager > Devices.
    2. Click the Device Tree tab and then double-click the device for which you want to configure dial-in options.
    3. Click the Configuration tab. In the configuration tree, select Interfaces > Interfaces List.
    4. Select the dialer interface and add or modify interface settings as specified in Table 1.
    5. Click one:
      • OK—Saves the changes.
      • Cancel—Cancels the modifications.

    Table 1: Dialer Interface for Dial-in Configuration Details

    Option

    Function

    Your Action

    Unit > Dialer Options > Incoming Map

    Caller

    Specifies the incoming map options for the dialer interface.

    • Select accept-all to accept all incoming calls.
    • Select caller to accept calls from a specific caller ID.
    Caller

    Name

    Specifies the caller ID to be accepted on the dialer interface.

    Enter the caller ID.

    Published: 2013-01-06