Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring a Dialer Interface (NSM Procedure)

    To configure a dialer interface for the device:

    1. In the NSM navigation tree, select Device Manager > Devices.
    2. Click the Device Tree tab and then double-click the device for which you want to configure the dialer interface.
    3. Click the Configuration tab. In the configuration tree, select Interfaces > Interfaces List.
    4. Add or modify interface settings as specified in Table 1.
    5. Click one:
      • OK—Saves the changes.
      • Cancel—Cancels the modifications.

    Table 1: Dialer Interface Configuration Details

    Option

    Function

    Your Action

    Name

    Specifies the name of the new interface.

    Enter a name for the new interface.

    Description

    Differentiates between different dialer interfaces.

    Enter a description for the new interface.

    Encapsulation

    Specifies the encapsulation.

    Select PPP from the encapsulation list.

    Unit

    Unit

    Specifies the logical unit.

    Enter the unit number.

    Unit > Dialer Options

    Pool

    Specifies the name of the dialer pool to use for USB modem connectivity.

    Enter the name of the dialer pool.

    Unit > Family > Inet > Address

    Name

    Specifies the source IP address for the dialer interface.

    Enter the source IP address.

    Destination

    Specifies the destination IP address for the dialer interface.

    Enter the destination IP address.

    Published: 2013-01-06