Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring a RADIUS Server (NSM Procedure)

    You can configure RADIUS server.

    To configure a RADIUS server:

    1. In the NSM navigation tree, select Device Manager > Devices.
    2. Click the Device Tree tab, and then double-click the device for which you want to configure the RADIUS server feature.
    3. Click the Configuration tab. In the configuration tree, select Access > Radius Server.
    4. Click + to configure RADIUS server options as described in Table 1.
    5. Click one:
      • OK—Saves the changes.
      • Cancel—Cancels the modifications.
      • Apply—Applies the RADIUS server parameters.

    Table 1: RADIUS Server Configuration Details

    Option

    Function

    Your Action

    Name

    Specifies the RADIUS server internet protocol (IP) address name.

    Enter a RADIUS server IP address name.

    Comment

    Supplies a descriptive comment about the RADIUS sever.

    (Optional) Enter a comment.

    Port

    Specifies the RADIUS server authentication port number.

    Set the RADIUS server authentication port number.

    Range: 1 through 65535.

    Accounting Port

    Specifies the port number for sending the RADIUS server messages.

    Set the accounting port number.

    Range: 1 through 65535.

    Secret

    Specifies the shared secret password with the RADIUS server.

    Enter the shared secret password value.

    Timeout

    Specifies the request timeout period.

    Set the timeout period.

    Range: 1 through 90.

    Retry

    Specifies the number of retry attempts.

    Set the retry attempts.

    Range: 1 through 10.

    Source Address

    Specifies the source address of the RADIUS server.

    Enter the source address for the RADIUS server.

    Routing Instance

    Specifies the collection of routing tables used to send RADIUS packets to the RADIUS server.

    Select the routing instance from the list.

    Published: 2013-01-06