Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring RADIUS Options (NSM Procedure)

    You can configure Remote Authentication Dial In User Service (RADIUS) options for the NAS-IP address for outgoing RADIUS packets and password protocol used in RADIUS packets.

    To configure RADIUS options:

    1. In the NSM navigation tree, select Device Manager > Devices.
    2. Click the Device Tree tab. Then double-click the device for which you want to configure radius options.
    3. Click the Configuration tab. In the configuration tree, select System > Radius Options.
    4. Enter a comment in the Radius Options workspace that describes the RADIUS options.
    5. Select a password protocol in the Radius Options workspace that specifies the password protocol used in the RADIUS packets.
    6. Add or modify settings as specified in the Table 1.
    7. Click one:
      • OK—Saves the changes.
      • Cancel—Cancels the modifications.
      • Apply—Applies the radius option settings.

    Table 1: Radius Option Configuration Details

    Option

    Function

    Your Action

    Comment

    Supplies a descriptive comment of the attributes.

    Enter a comment.

    Nas IP Address

    Specifies the value of NAS-IP address in outgoing RADIUS packets.

    Enter the NAS-IP address.

    Published: 2013-01-06