Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring the ILMI Protocol (NSM Procedure)

    To configure the ILMI protocol in NSM:

    1. In the NSM navigation tree, select Device Manager > Devices.
    2. Click the Device Tree tab, and then double-click the device to select it.
    3. Click the Configuration tab. In the configuration tree, expand Protocols > ilmi.
    4. Select Traceoptions.
    5. Add or modify settings as specified in Table 1.
    6. Click one:
      • OK—Saves the changes.
      • Cancel—Cancels the modifications.

    Table 1: Trace Options Configuration Details

    TaskYour Action

    Define tracing options.

    1. In the Comment box, enter the comment for the traceoptions.
    2. Select the No Remote Trace check box to disable remote tracing globally or for a specific tracing operation.

    Specify the name of the file to receive the output of the tracing operation and the maximum number of trace files.

    1. Click File next to Traceoptions.
    2. In the Comment box, enter the comment for the file.
    3. In the Filename box, enter the name of the file to receive the output of the tracing operation.
    4. In the Size box, enter the maximum size of each trace file, in kilobytes (KB), megabytes (MB), or gigabytes (GB).

      Range: 10240 through 1073741824

    5. From the Files list, select the maximum number of trace files.

      Range: 2 through 1000.

    6. Select one of the following:
      • world-readable—To enable unrestricted file access.
      • no-world-readable—To restrict file access to owner. This is the default setting.

    Specify the tracing operation to perform.

    1. Click Add new entry next to Flag.
    2. From the Name list, select the flag.
      • database—Trace database events.
      • routing-socket—Trace Routing socket events.
      • state—Trace state change events.
      • debug—Trace debug messages.
      • event—Trace event handler events.
      • packet—Trace packet events.
      • all—Trace all areas of code.
    3. In the Comment box, enter the comment for the flag.

    Published: 2013-01-02