Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring a BGP Export Policy Condition (NSM Procedure)

    You can define a routing policy condition based on the existence of routes in specific tables for use in a BGP export policy.

    To configure condition in NSM:

    1. In the navigation tree, select Device Manager > Devices.
    2. In the Devices list, double-click the device to select it.
    3. Click the Configuration tab.
    4. In the configuration tree, expand Policy Options.
    5. Select Condition.
    6. Add or modify the parameters as specified in Table 1.
    7. Click one:
      • OK—To save the changes.
      • Cancel—To cancel the modifications.
      • Apply — To apply the protocol settings.

    Note: After you make changes to a device configuration, you must push that updated device configuration to the physical security device for those changes to take effect. You can update multiple devices at one time. See the Updating Devices section in the Network and Security Manager Administration Guide for more information.

    Table 1: Condition Configuration Details

    Option

    Function

    Your Action

    Name

    Specifies the name of the condition.

    Enter a name.

    Comment

    Specifies the comment for the condition.

    Enter a comment.

    Route Active On

    Enables you to specify the policy condition based on the existing routes and the corresponding route tables.

    1. Select Route Active On.
    2. Select one:
      • None—No policy condition based on routes need to be specified.
      • if-route-exists—Specify the policy condition based on the routes. Enter the comment, route and the corresponding routing table.
    3. Click OK.

    Published: 2013-01-06