Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring the Polling Interval for Device Alarm Status (NSM Procedure)

    The default polling interval is 900 seconds (15 minutes). To configure polling intervals for alarm Status:

    1. In the NSM navigation tree, select Device Manager > Devices.
    2. Click the Device Tree tab, and then double-click the device to set the polling interval.
    3. Click the Info tab, and select Device Admin.
    4. Set the polling interval for the device. The minimum polling interval is 60 seconds. The maximum interval is 2,147,483,647 seconds. You cannot disable polling.
    5. Click one:
      • OK—Saves the changes.
      • Cancel—Cancels the modifications.

    Published: 2013-01-06