Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring Auto Policing (NSM Procedure)

    You can enable the automatic policing of all the MPLS layered service providers on the device or logical system.

    To configure automatic policing:

    1. In the NSM navigation tree, select Device Manager > Devices.
    2. Click the Device Tree tab, and then double-click the device for which you want to configure automatic policing.
    3. Click the Configuration tab. In the configuration tree, select Protocols > Mpls > Auto Policing.
    4. Enter a descriptive comment for the automatic policing in Comment.
    5. In the configuration tree, select Protocols > Mpls > Auto Policing > Class.
    6. Click + to configure automatic policing as described in Table 1.
    7. Click one:
      • OK—Saves the changes.
      • Cancel—Cancels the modifications.
      • Apply—Applies the automatic policing parameters.

    Table 1: Auto Policing Configuration Details

    Option

    Function

    Your Action

    Name

    Specifies the automatic policing class name.

    Enter an automatic policing class name.

    Comment

    Supplies a descriptive comment for the automatic policing class.

    (Optional) Enter a comment.

    drop

    Specifies all the packets to be dropped.

    Select the option.

    loss-priority-high

    Specifies that a packet has high loss priority.

    Select the option.

    loss-priority-low

    Specifies that a packet has low loss priority.

    Select the option.

    Published: 2013-01-06