Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring Location (NSM Procedure)

    To configure location:

    1. In the NSM navigation tree, select Device Manager > Devices.
    2. Click the Device Tree tab, and then double-click the device for which you want to configure a location.
    3. Click the Configuration tab. In the configuration tree, select System > Location.
    4. Add or modify the settings as specified in Table 1.
    5. Click one:
      • OK—Saves the changes.
      • Cancel—Cancels the modifications.
      • Apply—Applies the location settings.

    Table 1: Location Details

    Option

    Function

    Your Action

    Comment

    Supplies a descriptive comment for the location.

    (Optional) Enter a comment.

    Country Code

    Specifies the two letter country code for the location.

    Enter the country code for the location.

    Postal Code

    Specifies the zip code or the postal code for the location.

    Enter the zip code or the postal code of the location.

    Npa Nxx

    Specifies the first six digits of the phone number (area code with the exchange number).

    Enter the phone number (area code with the exchange number).

    Latitude

    Specifies the latitude in degree format.

    Enter the latitude of the location.

    Longitude

    Specifies the longitude in degree format.

    Enter the longitude of the location.

    Altitude

    Specifies (in degrees) the altitude (feet above or below the sea level).

    Set the altitude of the location. Range: -2147483648 - 2147483647.

    Lata

    Specifies the long distance service area.

    Enter a long distance service area of the location.

    Vcoord

    Specifies the Bellcore vertical coordinate information.

    Enter a Bellcore vertical coordinate value.

    Hcoord

    Specifies the Bellcore horizontal coordinate information.

    Enter a Bellcore horizontal coordinate value.

    Building

    Specifies the building name.

    Enter the building name.

    Floor

    Specifies the floor of the building.

    Enter the floor of the building.

    Rack

    Specifies the rack number.

    Enter the rack number.

    Location > Lcc

    Name

    Specifies the name for the LCC number.

    Set a name for the LCC number. Range: 0 - 3.

    Comment

    Supplies a descriptive comment for the LCC.

    (Optional) Enter a comment.

    Floor

    Specifies the floor of the building.

    Enter the floor of the building.

    Rack

    Specifies the rack number

    Enter the rack number.

    Published: 2013-01-06