Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring LDAP Options (NSM Procedure)

    You can configure Lightweight Directory Access Protocol (LDAP) authentication options.

    To configure LDAP options:

    1. In the NSM navigation tree, select Device Manager > Devices.
    2. Click the Device Tree tab, and then double-click the device for which you want to configure the LDAP options.
    3. Click the Configuration tab. In the configuration tree, select Access > Ldap Options.
    4. Enter a comment for the LDAP option in Comment.
    5. Enter the amount of time that elapses before the primary server is contacted, if backup server is being used in Revert Interval.
    6. Enter a distinguished name (DN) in Base Distinguished Name .

      The base distinguished name can be used in one of the following ways:

      • If you are using the assemble statement so that the user's distinguished name is being assembled, the base distinguished name is appended to a username to generate the user's distinguished name. The resulting distinguished name is used in the LDAP bind call.
      • If you are using the search statement so that the user's distinguished name is found by a search, the search is restricted to the subtree of the base distinguished name.
    7. Click one:
      • OK—Saves the changes.
      • Cancel—Cancels the modifications.
      • Apply—Applies the LDAP option parameters.

    Configuring Assemble

    To configure an assemble:

    1. In the NSM navigation tree, select Device Manager > Devices.
    2. Click the Device Tree tab, and then double-click the device for which you want to configure the assemble feature.
    3. Click the Configuration tab. In the configuration tree, select Access > Ldap Options > Assemble.
    4. Select an option to configure the assemble feature.
    5. Add or modify settings as specified in Table 1.
    6. Click one:
      • OK—Saves the changes.
      • Cancel—Cancels the modifications.
      • Apply—Applies the assemble settings.

    Table 1: Assemble Configuration Details

    OptionFunctionYour Action

    Ldap Options > Assemble > assemble

    Comment

    Supplies a descriptive comment for the assemble option.

    (Optional) Enter a comment.

    Common Name

    Specifies the prefix for the user distinguished name.

    Enter a common name.

    Ldap Options > Assemble > search

    Comment

    Supplies a descriptive comment for the search option.

    (Optional) Enter a comment.

    Search Filter

    Specifies the filter to use in the search.

    Enter the search filter.

    Ldap Options > Assemble > search > Admin Search

    Enable Search

    Specifies configuration of the admin search.

    Select the check box to enable the feature.

    Comment

    Supplies a descriptive comment for the admin search.

    (Optional) Enter a comment.

    Distinguished Name

    Specifies the administrator’s distinguished name.

    Enter the administrator’s distinguished name.

    Password

    Specifies the administrator password.

    Enter the password.

    Published: 2013-01-06