Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring Interface Routes (NSM Procedure)

    You can associate a routing table group with the device’s interfaces and specify routing tables into which interface routes are imported. To define the routing tables into which interface routes are imported, you create a routing table group and associate it with the device’s interfaces.

    To configure interface routes in NSM:

    1. In the navigation tree, select Device Manager > Devices .
    2. In the Devices list, double click the device to select it.
    3. Click the Configuration tab.
    4. In the configuration tree, expand Routing Options.
    5. Select Interface Routes.
    6. Add or modify the parameters as specified in Table 1.
    7. Click one:
      • OK—To save the changes.
      • Cancel—To cancel the modifications.
      • Apply—To apply the routing option settings.

    Note: After you make changes to a device configuration, you must push that updated device configuration to the physical security device for those changes to take effect. You can update multiple devices at one time. See the Updating Devices section in the Network and Security Manager Administration Guide for more information.

    Table 1: Interface Routes Fields



    Your Action


    Specifies the comment for the interface route.

    Enter a comment.


    Specifies the address family as IPv4 or IPv6.

    1. Expand the Interface Routes tree and select Family.
    2. Click the New button or select a family name and click the Edit button.
    3. Enter the family name and comment.
    4. Set up the export policy and import policy.

    Rib Group

    Specifies the routing table groups to which interface routes are imported.

    1. Expand the Interface Routes tree and select Rib Group.
    2. Enter the comment and Inet.

    Published: 2013-01-06