Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Specifying the Name of a Group of DHCP Server Addresses for Use by the Extended DHCP Relay Agent (NSM Procedure)

    You can specify the name of a group of DHCP server addresses for use by the extended DHCP relay agent.

    1. In the NSM navigation tree, select Device Manager > Devices.
    2. Click the Device Tree tab, and then double-click the device to select it.
    3. Click the Configuration tab. In the configuration tree, expand Forwarding Options > DHCP Relay.
    4. Select Server Group.
    5. Add or modify settings as specified in Table 1.
    6. Click one:
      • OK—Saves the changes.
      • Cancel—Cancels the modifications.

    Table 1: Sever Group Configuration Details

    TaskYour Action

    Specify the name of a group of DHCP server addresses for use by the extended DHCP relay agent.

    1. Expand Server Group.
    2. In the Comment box, enter the comment for the server group.
    3. Click Server Group next to Server Group.
    4. Click Add new entry next to Server Group.
    5. Expand Server-Group.
    6. In the Name box, enter the name of the group of DHCP server addresses.
    7. In the Comment box, enter the comment for the server group.
    8. Click Address next to Server-Group.
    9. Click Add new entry next to Address.
    10. In the Name box, enter the IP address of the DHCP server belonging to this named server group. You can configure a maximum of five IP addresses per named server group.

    Published: 2013-01-02