Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Related Documentation
Configuring Host Checker Automatic Installation (NSM Procedure)
You can configure the Infranet Controller to automatically install Host Checker on client computers only for agentless access deployments.
 | Note: To install Host Checker, users must have appropriate privileges, as described in the Client-Side Changes Guide on the Juniper Networks Support site. |
To automatically install Host Checker on client computers:
- In the NSM navigation tree, select Device Manager > Devices.
- Click the Device Tree tab, and then double-click the Infranet Controller device for which you want to automatically install Host Checker.
- Click the Configuration tab. In the configuration tree, select Authentication > Endpoint Security > Host Checker.
- From the Settings tab, select the Auto-upgrade Host Checker check box.
- Click one:
- OK—Saves the changes.
- Cancel—Cancels the modifications.
