Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring CoS Routing Instances (NSM Procedure)

    You can apply a custom MPLS EXP classifier to the routing instance with VPN routing and forwarding (VRF) table labels enabled using this option. The default MPLS EXP classifier or one that is previously defined can be applied for routing instance.

    To configure Class-of-Service routing instances in NSM:

    1. In the NSM navigation tree, select Device Manager > Devices.
    2. Click the Device Tree tab, and then double-click the device to select it.
    3. Click the Configuration tab. In the configuration tree, expand Class of Service.
    4. Select Routing Instances.
    5. Add or modify settings as specified in Table 1.
    6. Click one:
      • OK—Saves the changes.
      • Cancel—Cancels the modifications.

    Table 1: Routing Instances Configuration Details

    TaskYour Action

    Apply a custom MPLS EXP classifier to the routing instance for routing instances with VRF table labels enabled.

    1. Click Add new entry next to Routing Instances.
    2. In the Name box, enter the name of the routing instance.

    Specify the classifier name.

    1. Click Classifiers next to routing-instances.
    2. Click Dscp next to Classifiers.
    3. In the Comment box, enter the comment.
    4. From the Classifier name list, select the classifier name.
    5. Click Dscp IPv6 next to Classifiers.
    6. In the Comment box, enter the comment.
    7. From the Classifier name list, select the classifier name.
    8. Click Exp next to Classifiers.
    9. From the Classifier Name list, select the classifier name.
    10. Click Ieee 802.1 next to Classifiers.
    11. In the Comment box, enter the comment.
    12. From the Classifier name list, select the classifier name.
    13. From the Vlan tag list, select the VLAN tag.

    Specify a rewrite-rules mapping for the traffic that passes through all queues on the interface.

    1. Click Rewrite Rules next to routing-instances.
    2. In the Comment box, enter the comment.
    3. Click Ieee 802.1 next to Rewrite Rules.
    4. Select one of the following:
      • Ieee–802.1d—To apply an IEEE-802.1 rewrite rule
      • Ieee–802.1ad—To apply an IEEE-802.1ad rewrite rule

    5. In the Comment box, enter the comment.
    6. From the Rewrite Rule Name list, select the name of a rewrite-rules mapping.
    7. From the Vlan tag list, select the VLAN tag.

    Published: 2013-01-02