Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring Confederation (NSM Procedure)

    Grouping autonomous systems (ASs) into confederations reduces the number of BGP connections required to interconnect ASs. If you administer multiple ASs that contain many BGP systems, you can group them into one or more confederations. Each confederation is identified by its own AS number, which is called a confederation AS number. To external ASs, a confederation appears to be a single AS. Thus, the internal topology of the ASs (members) making up the confederation is hidden. Because each confederation is treated as if it were a single AS, you can apply the same routing policy to all the ASs that make up the confederation.

    To configure a confederation in NSM:

    1. In the navigation tree, select Device Manager > Devices .
    2. In the Devices list, double click the device to select it.
    3. Click the Configuration tab.
    4. In the configuration tree, expand Routing Options.
    5. Select Confederation.
    6. Add or modify the parameters as specified in Table 1.
    7. Click one:
      • OK—To save the changes.
      • Cancel—To cancel the modifications.
      • Apply—To apply the routing option settings.

    Note: After you make changes to a device configuration, you must push that updated device configuration to the physical security device for those changes to take effect. You can update multiple devices at one time. See the Updating Devices section in the Network and Security Manager Administration Guide for more information.

    Table 1: Confederation Fields

    Option

    Function

    Your Action

    Comment

    Specifies the comment for the confederation.

    Enter a comment.

    Confederation As

    Specifies the confederation AS number.

    Enter a number from 1 through 65535.

    Members

    Specifies the AS number of the confederation member, allowing you to add members to the confederation.

    1. Expand the Confederation tree and select Members.
    2. Click the New button or select a member and click the Edit button.
    3. Enter the AS number of the member.

    Published: 2013-01-02