Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring ARP (NSM Procedure)

    The address resolution protocol (ARP) is a protocol that is used to identify the hardware address of a network host. To configure ARP:

    1. In the NSM navigation tree, select Device Manager > Devices.
    2. Click the Device Tree tab, and then double-click the device for which you want to configure the ARP.
    3. Click the Configuration tab. In the configuration tree, select System > Arp.
    4. Select Enable Feature to enable this feature.
    5. Add or modify settings as specified in Table 1.
    6. Click one:
      • OK—Saves the changes.
      • Cancel—Cancels the modifications.
      • Apply—Applies the ARP configuration settings.

    Table 1: Arp Configuration Details

    OptionFunctionYour Action

    Comment

    Supplies a descriptive comment for the ARP.

    (Optional) Enter a comment.

    Aging Timer

    Specifies the change in the ARP aging time value.

    Set the aging timer value. Range: 1 - 240.

    Passive Learning

    Specifies the ARP passive learning.

    Select the Passive Learning check box to enable this feature.

    Purging

    Specifies that the ARP purges when the link goes down.

    Select the Purging check box to enable this feature.

    Gratuitous Arp On Ifup

    Specifies the gratuitous ARP announcement on the interface up.

    Select the Gratuitous Arp On Ifup check box to enable this feature.

    Gratuitous Arp Delay

    Specifies the delay in the gratuitous Arp request.

    Set the gratuitous ARP delay value. Range: -2147483648 - 2147483647.

    System > Arp > Interfaces

    Comment

    Supplies a descriptive comment for the interface.

    (Optional) Enter a comment.

    System > Arp > Interfaces > Arp Interface

    Name

    Specifies the logical interface name for the ARP interface.

    Enter an ARP interface name.

    Comment

    Supplies a descriptive comment for the ARP interfaces.

    (Optional) Enter a comment.

    Aging Timer

    Specifies the change in the ARP aging time value.

    Set the aging timer value. Range: 1 - 240.

    Published: 2013-01-06