Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring Infranet Controller Source IP Access Restrictions (NSM Procedure)

    Source IP access restrictions control from which IP addresses users can access an Infranet Controller sign-in page, be mapped to a role, or access a resource.

    To configure Infranet Controller source IP access restrictions:

    1. In the navigation tree, select Device Manager> Devices.
    2. Click the Device Tree tab, and then double-click the Infranet Controller device for which you want to configure source IP access restrictions.
    3. Click the Configuration tab. In the Configuration tree, select:
      • Administrators > Admin Roles > Select Role > General > Restrictions > Source IP Restrictions to configure source IP access restrictions for admin roles.
      • Administrators > Admin Realms > Select Realm > Authentication Policies > Source IP to configure source IP access restrictions for admin realms.
      • Users > User Roles > Select Role > General > Restrictions > Source IP Restrictions to configure source IP access restrictions for user roles.
      • Users > User Realms > Authentication Policies > Source IP to configure source IP access restrictions for user realms.
    4. Add or modify settings as specified in Table 1.
    5. Click one:
      • OK—Saves the changes.
      • Cancel—Cancels the modifications.

    Table 1: Source IP Access Restrictions Configuration Details

    Option

    Function

    Your Action

    Allow

    Specifies from which IP addresses users can access an Infranet Controller sign-in page, be mapped to a role, or access a resource.

    • Select Users from any IP address to enable users to sign into the Infranet Controller from any IP address.
    • Select Users from IP addresses which pass the specified matching policies to allow access only to the listed IP addresses.

    Source IP Address

    Specifies the source IP address.

    Enter the IP address.

    Source IP Netmask

    Specifies the IP netmask.

    Enter the IP netmask.

    Access

    Specifies whether to allow or deny access.

    • Select Allow to allow the user to use the IP address.
    • Select Deny to prevent users from using the IP address.

    Enable Administrators to sign in on the External Port

    Specifies whether or not administrators can sign in from the external port

    Select this option to enable administrators to sign in on the external port..

    Note: This setting can be configured only for admin realms.

    Enable Administrators to sign in on the Internal Port

    Specifies whether or not administrators can sign in from the internal port.

    Select this option.

    Note: This setting can be configured only for admin realms.

    Published: 2012-11-28