Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring the Number of Concurrent Sessions and Concurrent Users for Infranet Controller Users (NSM Procedure)

    You can limit the number of concurrent sessions and concurrent users for Infranet Controller users. A user who enters a URL to one of this realm’s sign-in pages must meet any access management and concurrent user requirements specified for the authentication policy before the Infranet Controller presents the sign-in page to the user.

    To configure the number of concurrent sessions and concurrent users for Infranet Controller users:

    1. In the NSM navigation tree, select Device Manager > Devices.
    2. Click the Device tree tab, and then double-click the Infranet Controller device for which you want to configure the number of concurrent sessions and concurrent users.
    3. Click the Configuration tab. In the configuration tree, select the level at which you want to implement concurrent session restrictions. Then select:
      • Administrators > Admin Realms >Select Realm > Authentication Policies > Limits to configure the number of concurrent sessions for admin realms.
      • Users > User Realms >Select Realm > Authentication Policies > Limits to configure the number of concurrent sessions for user realms.

        Note: The number of concurrent users can be configured only for user realms.

    4. Add or modify settings as specified in Table 1.
    5. Click one:
      • OK—Saves the changes.
      • Cancel—Cancels the modifications.

    Table 1: Number of Concurrent Sessions and Concurrent Users for Infranet Controller User Configuration Details

    Option

    Function

    Your Action

    Limit number of concurrent users

    Limits the number of concurrent users on the realm.

    Select this option to limit the number of concurrent users.

    Guaranteed minimum

    Specifies the number of users between zero (0) and the maximum number of concurrent users defined for the realm, or you can set the number to the maximum allowed by your license if there is no realm maximum.

    Select or enter the number of users between zero (0) and the maximum number of concurrent users defined for the realm.

    Limit the number of concurrent sessions per user

    Specifies whether the number of concurrent sessions per user is limited.

    Select this option to limit the number of concurrent sessions per user.

    Session limit

    Specifies the number of sessions permissible.

    Note: You can configure this option only for user realms.

    Specify the number of sessions permitted. By default, the number is 1 if the realm maximum is greater than 0; otherwise, the default is 0. The maximum number must be no greater than the maximum number of concurrent users for the realm.

    Maximum

    Specifies the maximum number of concurrent users.

    Note: You can configure this option only for user realms.

    Select or enter the maximum number of concurrent users permissible.

    Published: 2012-11-28