Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring Access Address Pools (NSM Procedure)

    With an address pool, you configure an address or address range. When you define an address pool for a client, the layer2 tunneling protocol network server (LNS) allocates IP addresses for clients from an address pool.

    To configure access address pools in NSM:

    1. In the NSM navigation tree, select Device Manager > Devices.
    2. Click the Device Tree tab, and then double-click the device to select it.
    3. Click the Configuration tab. In the configuration tree, expand Access.
    4. Select Address Pool.
    5. Add or modify settings as specified in Table 1.
    6. Click one:
      • OK—Saves the changes.
      • Cancel—Cancels the modifications.

    Table 1: Access Address Pool Configuration Details

    TaskYour Action

    Allocate IP addresses for clients.

    1. Click Address Pool next to Access.
    2. Click Add new entry next to Address Pool.
    3. In the Name box, enter the name to be assigned to an address pool.
    4. In the Comment box, enter the comment.
    5. Click Address next to address-pool.

      Select one of the following:

      • Select address to enter the address.

        Enter the address.

      • Select address-range to configure the address range.
        1. In the Low box, enter the lower limit of an address range.
        2. In the High box, enter the upper limit of an address range.

    Published: 2013-01-02