Configuring Internet Protocol Filters (NSM Procedure)

You can configure IP filters in NSM that the Secure Access device can apply to Network Connect IP pools.

To configure Internet protocol filters:

  1. In the NSM navigation tree, select Device Manager > Devices. Click the Device Tree tab, and then double-click the Secure Access device for which you want to configure Internet protocol filters.
  2. Click the Configuration tab, and select System > Network Settings > Network Connect. The corresponding workspace appears.
  3. Add or modify settings as specified in Table 81.
  4. Click one:
    • OK—Saves the changes.
    • Cancel—Cancels the modification.

Table 81: Configuring Internet Protocol Filters Details

OptionFunction Your Action
Settings tab

NC Base IP Address

Displays the default Network Connect IP address.

Only change the Network Connect server IP address when instructed to do so by the Juniper Networks support team.

IP Address Filters

Specifies the IP address filters.

Enter the IP address filter.

Related Documentation