Example: Configuring Access Lists (NSM Procedure)

In this example, you create an access list on the trust-vr.

To create an access list on the trust-vr:

  1. In the NSM navigation tree, select Device Manager > Devices. Double-click the device object to open the device configuration.
  2. In the device navigation tree, select Network > Virtual Routers.
  3. Double-click the trust-vr virtual router. The General Properties screen appears.
  4. In the virtual router navigation tree, select Access List, and then click the Add icon in the main display area. The Access List Entries/New dialog box appears.
  5. For Access List Number, enter 2. This number uniquely identifies the access list.
  6. In the Access List Entries area, click the Add icon. The New Access List Entry dialog box appears. Configure the following:
    • For Sequence Number, enter 10. This number positions this statement relative to other statements in the access list.
    • For Action, select Permit.
    • For Prefix, select Prefix to Filter and enter the IP address/netmask
  7. Click OK to save the new access list.
  8. Click OK to save your changes to the virtual router, and then click OK again to save your changes to the device configuration.

Related Documentation