Configuring Auto Policing (NSM Procedure)

You can enable the automatic policing of all the MPLS layered service providers on the device or logical system.

To configure automatic policing:

  1. In the NSM navigation tree, select Device Manager > Devices.
  2. Click the Device Tree tab, and then double-click the device for which you want to configure automatic policing.
  3. Click the Configuration tab. In the configuration tree, select Protocols > Mpls > Auto Policing.
  4. Enter a descriptive comment for the automatic policing in Comment.
  5. In the configuration tree, select Protocols > Mpls > Auto Policing > Class.
  6. Click + to configure automatic policing as described in Table 69.
  7. Click one:
    • OK—Saves the changes.
    • Cancel—Cancels the modifications.
    • Apply—Applies the automatic policing parameters.

Table 69: Auto Policing Configuration Details

Option

Function

Your Action

Name

Specifies the automatic policing class name.

Enter an automatic policing class name.

Comment

Supplies a descriptive comment for the automatic policing class.

(Optional) Enter a comment.

drop

Specifies all the packets to be dropped.

Select the option.

loss-priority-high

Specifies that a packet has high loss priority.

Select the option.

loss-priority-low

Specifies that a packet has low loss priority.

Select the option.

Related Documentation