Configuring Auto Configuration (NSM Procedure)

To configure the auto configuration feature:

  1. In the NSM navigation tree, select Device Manager > Devices.
  2. Click the Device Tree tab, and then double-click the device for which you want to configure the auto configuration feature.
  3. Click the Configuration tab. In the configuration tree, select System > Auto Configuration.
  4. Select Enable Feature check box to enable this feature.
  5. Enter a comment in the Auto Configuration workspace that describes the auto configuration.
  6. Add or modify settings as described in Table 179.
  7. Click one:
    • OK—Saves the changes.
    • Cancel—Cancels the modifications.
    • Apply—Applies the auto configuration parameters.

Table 179: Auto Configuration Traceoptions Details

Option

Function

Your Action

System > Auto Configuration > Traceoptions

Comment

Supplies a descriptive comment for the traceoptions.

(Optional) Enter a comment.

No Remote Trace

Specifies that the remote tracing is disabled, upon selecting the check box.

Select the No remote Trace check box to enable this feature.

Level

Specifies the level of debugging output.

Select an option from the list.

System > Auto Configuration > Traceoptions > File

Comment

Supplies a descriptive comment for the filename.

(Optional) Enter a comment.

Filename

Specifies the filename in which to write the trace information.

Enter the filename.

Size

Specifies the maximum trace file size.

Enter the maximum trace file size.

Files

Specifies the maximum number of trace files.

Set the maximum number of trace files. Range: 2 - 1000.

None

Specifies that neither the world-readable nor the no-world-readable option is enabled.

Select the option.

world-readable

Allows any user to read the log file.

(Optional) Select the option.

no-world-readable

Prevents any user from reading the log file.

(Optional) Select the option.

Match

Specifies the regular expression for the lines to be logged.

Enter the regular expression for the lines to be logged.

System > Auto Configuration > Traceoptions > Flag

Name

Specifies the trace flag name.

Enter a trace flag name.

Comment

Supplies a descriptive comment for the trace flag.

(Optional) Enter a comment.

Related Documentation