Configuring Dial-in Options on a Dialer Interface (NSM Procedure)

To configure dial-in options on a dialer interface:

  1. In the NSM navigation tree, select Device Manager > Devices.
  2. Click the Device Tree tab and then double-click the device for which you want to configure dial-in options.
  3. Click the Configuration tab. In the configuration tree, select Interfaces > Interfaces List.
  4. Select the dialer interface and add or modify interface settings as specified in Table 39.
  5. Click one:
    • OK—Saves the changes.
    • Cancel—Cancels the modifications.

Table 39: Dialer Interface for Dial-in Configuration Details



Your Action

Unit > Dialer Options > Incoming Map


Specifies the incoming map options for the dialer interface.

  • Select accept-all to accept all incoming calls.
  • Select caller to accept calls from a specific caller ID.


Specifies the caller ID to be accepted on the dialer interface.

Enter the caller ID.

Related Documentation