Configuring the Infranet Controller as an SNMP Agent (NSM Procedure)

The Infranet Controller supports Simple Network Management Protocol version 2 (SNMPv2), implements a private MIB, and defines its own traps. To enable your network management station to process these traps, you need to download the Juniper Networks MIB file and specify the appropriate information to receive the traps.

To specify SNMP settings:

In the NSM navigation tree, select Device Manager> Devices.
Click the Device Tree tab, and then double-click the Infranet Controller for which you want to specify SNMP settings.
Click the Configuration tab. In the configuration tree, select System > Log/Monitoring > SNMP.
Add or modify settings as specified in Table 62.
Click one:
- OK—Saves the changes.
- Cancel—Cancels the modifications.

Table 62: SNMP Agent Configuration Details

Option	Function	Your Action
Trap Settings
Check Frequency	Specifies the check frequency trap threshold .	Enter the check frequency trap threshold in seconds.
Log Capacity	Specifies the log capacity trap threshold .	Enter a percentage for the log capacity trap threshold.
Users	Specifies the users trap threshold.	Enter a percentage for the users trap threshold.
Memory	Specifies the memory trap threshold.	Enter a percentage for the memory trap threshold.
Swap Memory	Specifies the swap memory trap threshold.	Enter a percentage for the swap memory trap threshold.
Disk	Specifies the disk trap threshold.	Enter a percentage for the disk trap threshold.
CPU	Specifies the CPU trap threshold.	Enter a percentage for the CPU trap threshold.
Send Traps for Critical Log Events	Specifies that SNMP traps will be sent for critical log events.	Select this option to send SNMP traps for critical log events.
Send Traps for Major Log Events	Specifies that SNMP traps will be sent for major log events.	Select this option to send SNMP traps for major log events.
SNMP Servers	Specifies the servers to which you want the Infranet Controller to send the traps that it generates.	Enter the hostname or IP address, port number, and community.
Settings
SNMP Queries	Specifies the SNMP queries for the Infranet Controller.	Select this option.
SNMP Traps	Specifies the SNMP traps for the Infranet Controller.	Select this option.
System Name	Specifies the agent name.	Enter the system name.
System Location	Specifies the agent location.	Enter the system location.
System Contact	Specifies the agent contact information.	Enter the system contact information.
Community	Specifies the agent community.	Enter a string.

Configuring the Infranet Controller as an SNMP Agent (NSM Procedure)

Related Documentation