Configuring User Access Logs (NSM Procedure)

The user access log file contains information about when users access the appliance, including the number of simultaneous users at each one-hour interval (logged on the hour) and user sign-ins and sign-outs.

To configure user access logs:

  1. In the NSM navigation tree, select Device Manager> Devices.
  2. Click the Device Tree tab, and then double-click the Infranet Controller for which you want to configure user access logs.
  3. Click the Configuration tab. In the configuration tree, select System > Log/Monitoring > User Access.
  4. Add or modify settings as specified in Table 60.
  5. Click one:
    • OK—Saves the changes.
    • Cancel—Cancels the modifications.

Table 60: User Access Logs Configuration Details

Option

Function

Your Action

Settings

Max Log Size

Specifies the maximum file size for the local log file. The limit is 500 MB.

Enter the maximum log file size.

Select Event to Log

Login/Logout

Logs the user login and logout information.

Select this option to log login and logout information.

User Settings

Logs the user settings.

Select this option to log user setting information.

Client Certificate

Logs the client certificate messages for the user.

Select this option to log client certificate messages for the user.

IFMAP Client User Message

Logs the IFMAP client user messages.

Select this option to log IFMAP client user messages.

Outlook Anywhere

Logs the RPC over http messages.

Select this option to log RPC over http messages.

Enforcer Deny Messages

Logs the enforcer deny messages.

Select this option to log enforcer deny messages.

Radius Accounting Messages

Logs the radius accounting messages.

Select this option to log radius accounting messages

User Connection Messages

Logs the user connection messages.

Select this option to log the user connection messages.

Endpoint Heartbeat Messages

Logs heartbeat messages from the endpoints.

Select this option to log heartbeat messages from the endpoints.

Pulse Client Messages

Logs pulse client messages.

Select this option to log pulse client messages.

Syslog Servers

Server name/IP

Specifies the name or IP address of the syslog server.

Enter the server name or the IP address.

Facility

Specifies the facility for the server. The Infranet Controller provides eight facilities (LOCAL0-LOCAL7) that you can map to facilities on your syslog server.

Select the facility.

Filter

Specifies the filter that you want to apply to the log file.

Select the filter.

Related Documentation

Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.