Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Known Issues

 

Table 3 lists known issues that are outstanding in NorthStar Release 6.0.2. If an identifier is reported, it is the assigned identifier in the GNATS problem report tracking system.

Table 3: Known Issues in NorthStar Controller Release 6.0.2.

Identifier

Description

1449676

Toposerver and mladapter restarted intermittently.

1452486

PRPD does not remove prefixes (prefixes that have mapping) that were withdrawn by PCCs.

1473362

NorthStar cRPD does not forward adjacency-SID data to the topology server. As a consequence, cRPD could not be used for applications that use segment routing (including EPE steering). This is due to Junos OS behavior.

In NorthStar, this is fixed, but requires Junos OS 19.3R3 release to support it.

1497630

NorthStar pushes incomplete SRLG configuration to devices.

1502238

NorthStar Planner ingress and egress traffic had some interfaces shown with Terabyte information.

1534627

COS stats are missing for some Cisco devices.

NA

NorthStar Planner Desktop: There is no validation on the NorthStar Planner Destop when a license upload is attempted.

NA

The routing method is CSPF for P2MP groups which are configured from devices (as opposed to from within NorthStar), when the expected routing method is routeByDevice.

NA

Elastic Search cleanup task should remove LSP events more frequently.

NA

P2MP: NorthStar cannot process simultaneous different operations that modify a single device/LSP (POST and PATCH, POST and DELETE, PATCH and DELETE). To work around this issue, complete the first request and verify success in the NorthStar UI or on the device before submitting the next request.

NA

Need to add Cassandra cluster port check in net_setup.

NA

NorthStar cannot discover overload bit set properly in ISIS network by NTAD.

NA

BMP OSPF link migration merging link issue.

NA

Modifying a sub-LSP ERO for a scheduled P2MP tree causes the sub-LSP to be provisioned immediately because the provision order does not contain the schedule.

NA

Topo server fails to remove LSP config state.

NA

ConfigServer maintains deleted standby/secondary paths in its memory.

NA

PCC does not change RRO after ERO is changed by NorthStar.

NA

NETCONF-provisioned SR LSP is down (18.3R2.4).

NA

Netflow demands interface mappings were not updated correctly after device collection causing some demands to indicate NONE for VRF.

NA

RSVP-TE LSP with ERO and routing method OSPF should only be routed over OSPF-enabled link.

NA

If you change the cMGD password using net_setup.py (Option D > Option 8: Change cMGD Root Password), you must restart the following processes:

  • config:cmgd

  • config:cmgd-rest

NA

When netflow is using top prefix based aggregation and demands are generated to multiple egress PE, the traffic stats of the two are consolidated and cannot be distinguished from one another.

NA

PCEP P2MP Group: The Record Route of sub-LSP still displays the original path after the path has been changed.

NA

Network maintenance task is not working.

NA

When user specifies an explicit path that contains a node address, the NETCONF route-by-device provisioning order that NorthStar creates contains the address but does not correctly identify the type as "node".