The Juniper Networks NorthStar Controller is an SDN controller that enables granular visibility and control of IP/MPLS flows in large service provider and enterprise networks. Network operators can use the NorthStar Controller to optimize their network infrastructure through proactive monitoring, planning, and explicit routing of large traffic loads dynamically based on user-defined constraints.
The NorthStar Controller 6.0.2 release is qualified to work with Junos OS Release 18.3R2.4. We recommend contacting JTAC for information about the compatibility of other Junos OS releases.Table 1 lists feature-specific Junos OS requirements. The NorthStar features listed have been qualified with the specified Junos OS release and are intended to work with that release.
Table 1: Feature-Specific Junos OS Requirements
Junos OS Release
Segment Routing (SPRING), MD5 authentication for PCEP, P2MP, Admin groups
PCEP-Provisioned P2MP Groups
PCEP-Provisioned P2MP Groups with MVPN (S,G) Service Mapping via Flowspec
Bandwidth sizing and container LSPs for SR-TE LSPs
PCC Delegated LSP Support for SR LSPs
The Path Computation Element Protocol (PCEP) configuration on the PCC routers does not persist across upgrades when the SDN package is not part of the installation binary. Before upgrading the Junos OS image to this release, save the existing configuration to a file by using the save command. After you upgrade the Junos OS image on each PCC router, use the load override command to restore the PCEP configuration.
Please contact JTAC for information about compatibility with specific Juniper platforms.
Junos OS supports Internet draft draft-crabbe-pce-pce-initiated-lsp-03 for the stateful PCE-initiated LSP implementation.
NorthStar Controller is Federal Information Processing Standard (FIPS) compliant. This only affects, and is a benefit to, customers with FIPS enabled on their Linux servers.