List of Network Reports
Depending on the network type, the Report Manager displays a different set of reports. The following table lists the available reports. Reports marked with (Router) are device-specific reports and will only appear for the corresponding network type. All other reports are general and should appear for all networks.
Demand Path & Diversity
Lists details of all user demand requirements in the network. See Demand Reports
CoS Demands (Router)
Displays the worst propagation and queueing delays for each demand. See CoS Demands Report .
Demand Route Cost
Provides utilization costs according to demand routes. See Demand Route Cost Report .
Equal Cost Multi-Path (Router)
Lists equal cost multiple paths that exist in the network for nodes in the same AS and same OSPF area, and also for inter-area and inter-VPN demands. See Equal Cost Multi-Path Report.
Displays the demand path through links by interface out and in sequence.
Planned Link Utilization
Provides demand bandwidth utilization information for each link in the network. See Link Reports.
Planned Physical Interface Utilization
Provides demand bandwidth utilization information for each physical interface in the network. See Planned Physical Interface Utilization.
Per Node Pair (Measured)
Shows link utilization by period from the interface ingress and egress traffic files between connecting nodes.
Measured Link Util (based on trafficload)
Shows the measured traffic by link based on the trafficload file.
Demand Traffic vs Interface Traffic
Shows the comparison between planned and measured traffic. See Demand Traffic Versus Interface Traffic.
Demand Traffic vs Physical Interface Traffic
Shows the comparison between planed and measured traffic on physical interfaces.
CoS Links* (Router)
Displays the worst propagation and queueing delays for each CoS class on each link. See CoS Links Report.
Provides detailed link pricing information.
RSVP Bandwidth Allocation (Router)
Displays link partitions and their capacity allocation.
Interface Traffic (Router)
Displays interface load and utilization information. See Interface Traffic Report.
Interface CoS Traffic (Router)
Displays interface Traffic by Class of Service.
Interface Multicast Traffic (Router)
Displays interface Multicast Traffic.
AS Traffic (Router)
Displays traffic information for interfaces at different AS’s. See AS Traffic Report
Inter-AS Traffic (Router)
Displays traffic information between different AS’s. See Inter-AS Traffic Report.
Inbound/Outbound Network Traffic (Router)
For each node, displays an aggregate outbound and aggregate inbound value, corresponding to the sum of traffic originating and terminating at a node respectively - but only on interfaces that do not correspond to any links in the network model ( for example, customer-facing interfaces, PE-CE interfaces when CE configuration files are missing from the network model). This information is derived from the measured traffic on the interfaces (interface “egress” and “ingress” traffic files in the File > Load Network Files window). One purpose for this file is for use in the Traffic Matrix tool, as described in the NorthStar Planner Feature Guide.
Group Demand Summary by Group Pair
Shows summarized information for demands that are requested within a group or between two different groups.
Group Demand Detail by Group Pair
Shows detailed information for demands that are requested within a group or between two different groups.
Group Demand Traffic on Link Summary
Shows summarized information for links that exist within a group or between two different groups.
Group Demand Traffic on Link Detail
Shows detailed information for links that exist within a group or between two different groups.
Group Interface Load Summary (Router)
Shows summarized information for interface load of links within a group or between two different groups.
Group Interface Load Detail (Router)
Shows detailed information for interface load of links within a group or between two different groups.
Group Demand Bandwidth Distribution
Shows traffic statistics for groups such as source, destination, transit, and intra-group traffic.
Demand Traffic Per Node
Shows statistical information on demands that originate, pass through or terminate at each node in the network.
Measured Interface Traffic Per Node (Router)
Displays up to 24 periods of total incoming and outgoing traffic from each node based on the measured interface traffic data. Note that only interfaces corresponding to links in the network model are considered.
Node Link Port
Displays the number of ports on a node by link type.
VPN Interface Traffic (Router)
Reports the ingress and egress traffic on VPN interfaces for each traffic load period.
VPN Interface CoS Traffic (Router)
Reports VPN interface traffic broken down into CoS classes.
VPN Interface Multicast Traffic (Router)
Reports on the VPN interface multicast traffic load.
VPN Export-Import (Router)
Displays the route target export/import relationships that exist between VPNs in the network.
Displays the details of Layer 3 VPN’s in the network.
Layer2 Martini (Router)
Displays the details of Layer 2 Martini VPN’s in the network. See Layer2 Martini Report .
Layer2 Kompella* (Router)
Displays the details of Layer 2 Kompella VPN’s in the network. See Layer3/Layer2 Kompella Report
Layer2 CCC (Router)
Displays the details of Layer 2 circuit cross-connect VPN’s in the network.
Shows LDP based VPLS information
Shows BGP based VPLS information. Juniper Networks only.
Route Instance (Router) *
Reports on Routing Instances for OSPF or IS-IS. For more information, see the NorthStar Planner Feature Guide, Routing Instances chapter.
Subnet (Router) *
Displays all subnets in the network model
BGP > BGP * (Router)
Also called the BGP Integrity Checks Report. It contains four sections (select Application > Options > Report) including Unbalanced BGP Neighbor Check, IBGP Mesh Connectivity Check, Local/Neighbor AS Specification, and Route Reflector Statistics. See BGP Reports
OSPF > Inter Area Load Distribution* (Router)
Displays the load distribution between areas in the network
OSPF > Inter Area Paths* (Router)
Displays information regarding paths between two user-specified areas
OSPF > Area Pass through Paths* (Router)
Generates information regarding demands passing through an area in the network
OSPF > OSPF Area Summary* (Router)
Shows summarized information for each OSPF area See OSPF Area Summary
OSPF > OSPF Area Detail* (Router)
Shows detailed information for all routers in each OSPF area. See OSPF Area Detail Report
OSPF > ABR Bordering Area* (Router)
Displays the bordering areas for each ABR. See ABR Bordering Area Report.