Physical Interfaces
Selecting Physical Interfaces in the left pane displays an Interface List report listing all interfaces, their status, and additional information in the right pane. The saved report’s filename starts with “INTF_LIST.” The rows in the report can be sorted by clicking on the column header for the property to sort by.
Column | Description |
|---|---|
Name | Physical Interface Name, for example, TenGigE0/2/0/2 |
Hostname | Device hostname |
Device Name | Device name converted into NorthStar Planner format |
Device Vendor | Hardware vendor (Cisco, Juniper Networks) |
Card Id | Slot information, for example, S-0/1 |
Description | Physical interface description |
IP Address | IP address of physical interface, if assigned |
Device IP Addr. | Loopback IP address of the Device, typically the first one listed |
Device Mgmt IP Addr. | The Management IP Address is the IP addressed used by NorthStar Planner to discover the device. |
Admin Status | Interface Administrative status (active, down, or unknown) |
Physical Address | The address of the physical interface, based on intfmap NorthStar Planner file. |
Aggregated Link | Any associated aggregated link, such as PortChannel or Bundle-Ether |
Bandwidth T | he physical interface bandwidth, for example, 100.0M |
IPv6 | IPv6 address information (based on NorthStar Planner intfmap file) |
MTU | MTU information (based on NorthStar Planner intfmap file) |
Media Type | The Physical interface media type, for example, ATM,BRI,BVI,Cable,Channelized E1,DS,E1,Ethernet,FE,GE,OC3/STM1,T1,T3 |
Operational Status | Interface Operational Status (active, down, or unknown) |
Switchport Mode | Switchport mode for layer 2 interfaces, for example, access or trunk |
VLAN | List of VLAN’s for this physical interface, for example, “22 100-102 105-108” |