ON THIS PAGE
Platform and Software Compatibility
The NorthStar Controller 4.3.0 release is fully supported with Junos OS Release 17.2R1 and later.
NorthStar Controller 4.3.0 can be deployed with Junos OS Releases 15.1F6, 16.1R1, and 17.1R1, but the segment routing (SPRING) feature would not be available.
The NorthStar Controller Analytics features require specific Junos OS Releases to be able to obtain LSP and interface statistics. This is a Junos Telemetry Interface (JTI) dependency. We recommend Junos OS Release 15.1F6 or later if you plan to use Analytics.
NorthStar Controller 4.3.0 release can be deployed with Junos OS Releases 14.2R6, 15.1F4, and 15.1R4, but the following features would not be available:
MD5 authentication for PCEP
P2MP support
Admin group support
By default, the NorthStar Controller Release 3.0 and later requires that the external Junos VM be Release 17.2 or later. If you are using an older version of Junos OS, you can change the NorthStar configuration to support it, but segment routing support will not be available. See Installing the NorthStar Controller 4.3.0 for the configuration steps.
Other Junos OS releases are not supported.
The NorthStar Controller is supported on the following Juniper platforms: M Series, T Series, MX Series, PTX Series, QFX10008, and ACX5000.
As of Junos OS Release 17.4R1, NorthStar Controller is also supported on QFX5110, QFX5100, and QFX5200, and on SRX platforms (SRX300, SRX320, SRX340, SRX345, SRX550, SRX550M, SRX1500, SRX4100, SRX4200 devices, and vSRX instances).
Junos OS supports Internet draft draft-crabbe-pce-pce-initiated-lsp-03 for the stateful PCE-initiated LSP implementation (M Series, MX Series, PTX Series, T Series, QFX Series, and ACX Series).
The following sections provide information that will help guide you in determining which installation instructions you will need based on how you intend to install NorthStar, and how many servers you will need, based on the deployment scenario you choose:
Installation Options
Figure 1 summarizes the installation configurations that are supported for NorthStar.

For installation procedures, see:
Deployment Scenarios
Table 1 lists the supported deployment configurations by NorthStar 4.x release.
Table 1: Supported NorthStar Deployment Configurations by 4.x Release
Deployment Configuration | Features Available NorthStar Release 4.0.0 | Features Available NorthStar Release 4.1.0 | Features Available NorthStar Release 4.2.x, 4.3.0 |
---|---|---|---|
Description:
Number of Servers:
|
|
|
|
Description:
Number of Servers:
|
|
|
|
Description:
Number of servers:
|
|
|
|
Description:
Number of servers:
|
|
|
|
Description:
Number of servers:
|
|
|
|
Description:
Number of servers:
|
|
|
|
Description:
Number of servers:
|
|
|
|
Description:
Number of servers:
|
|
|
|