Demand Window Fields
This topic describes router-specific fields in the node, link, interface, demand, and tunnel tables as well as the Application Options windows.
Virtual Private Network
demand file, owner field
For a description of general details for demands, refer to the NorthStar Planner User Interface Guide. For more information about VPNs, see NorthStar Planner Virtual Private Networks Overview.
Table 1: Demand Type Parameter Generation
Specifies that the demand should route over a Guaranteed Bandwidth (e.g., subpool) tunnel
If this checkbox is selected, the flow will be routed along the same route in both directions.
If this field is selected, the flow must route only on interfaces of the given OSPF routing instance/process ID.
If this checkbox is selected, specify the destination IP in the adjacent select menu.
The following Protocol Independent Multicast modes can be specified:
Specify that this demand can be load-balanced to Equal Cost Multiple Paths, by splitting the flow into this number of sub-flows.
When selecting VoIP as the traffic type, you can select a signaling protocol (e.g., H.323, SIP)
When selecting VoIP as the traffic type, this offers a wide range of codecs, such as 64K(G.711)
Codec= codec_bandwidth, (e.g., Codec=64K)