Importing and Saving
Hardware information from a live network can also be imported on-demand via real-time SNMP and CLI outputs. Previously saved SNMP, CLI, and CSV data can also be imported for an offline network. To do this, open the Hardware Inventory window by selecting Inventory > Hardware Inventory. Then, at the bottom of the window, there is a toolbar with Load and Save buttons.
Clicking on the Load button displays several options.
Collect real-time SNMP and CLI data from a live network.
Load previously saved SNMP output.
Load previously saved CLI output.
Load previously saved CSV data.
Clicking on the Actions > Save button displays several options.
This saves the current report displayed in the right pane. Different reports can be selected via the tree in the left pane.
All Node/Shelf/Card Descriptions
Saves node/shelf/card descriptions for all devices in the network to a CSV file.
All Hardware Information for Comparison
Save the current complete hardware profile for future comparison.
Hardware Inventory File Format
When using CLI to collect the hardware information, the raw data files are saved into directory /u/wandl/data/collection/.LiveNetwork/equipment_cli. The file naming convention is “<Router Profile Name>.equipment_cli”.
When using SNMP to collect the hardware information, the raw data files are saved into directory /u/wandl/data/collection/.LiveNetwork/equipment. The file naming convention is “<IP>.iftable” and “<IP>.snmp”.
From the raw data, hardware inventory files are generated into XML format in directory /u/wandl/data/livenetwork_output_directory/swconf.x. The file naming convention is “<hostname>.xml”. Each collection method may have slightly different raw data values which is dependent on the device vendor. Also, SNMP may not be able to collect certain data fields that CLI can collect and vice versa. If both SNMP and CLI collection methods are used, the combined data collected will compliment each other in the hardware inventory files.
From the hardware inventory files, hardware inventory reports in CSV format can be generated by running Task Manager > Hardware Inventory Reports. The output directory of the reports can be specified along with options to timestamp the file names and save the reports to the Web. The CSV reports created are listed in the table below.
Device, IP, Vendor, OS, Chassis, Hardware ID, Boot Image, ROM, Memory, Processor
Card ID, Part #, Serial #, Port count
Interface, IP, Status, Physical Address
Miscellaneous parts: power supply, fan, display
Cost, Part Type, Component Name grouped by Device
Cost, Part Type, Component Name grouped by Part Type
Card Usage, Port Usage grouped by Device
Card Usage, Port Usage grouped by Card
Integrity Check report for unknown or unsupported data