The Utilization displays the planned utilization rate of links resulting from the demands in the network model.
The Peak Util displays the links according to the peak utilization reached on that link in a failure simulation.
The Measured Link Util displays the measured link utilization, up to 24 periods. A slider bar can be used to check the utilization at different periods. The data comes from the ingress (interfaceLoad_in) or egress (interfaceLoad_out) files. For the live network this is named Interface CoS Util and uses the /u/wandl/data/.network/interface.traffic and interfacei.traffic files.
The Demand CoS Util displays the normal and peak utilization per CoS calculated based on demand routing. In this case, it is based off of both the demand and trafficload file. The trafficload file is used to display up to 24 periods. A slider bar can be used to check the utilization at different periods.
This will open a color palette that allows you to choose a color for the section selected on the color slider.
This will add a new divider on the color bar at the location of the right-mouse-click.
This will change the maximum utilization percentage on the color slider to the specified value in the New Max window.
Change Viewing Range
Use this to zoom into a particular percentage range, for example, 0.00-10.00% for greater granularity.
Show Selected Color
Selecting this option shows links that have the selected color. Note that when deselecting a color, a link is hidden only if the colors of both of its interfaces are deselected.
Shows links of any colors.
Hides all links.
Reset to Defaults
This will reset the Prov Util color bar to the original default setting of dividers and colors.