Selecting Physical Interfaces in the left pane displays an Interface List report listing all interfaces, their status, and additional information in the right pane. The saved report’s filename starts with “INTF_LIST.” The rows in the report can be sorted by clicking on the column header for the property to sort by.
Physical Interface Name, for example, TenGigE0/2/0/2
Device name converted into NorthStar Planner format
Hardware vendor (Cisco, Juniper Networks)
Slot information, for example, S-0/1
Physical interface description
IP address of physical interface, if assigned
Device IP Addr.
Loopback IP address of the Device, typically the first one listed
Device Mgmt IP Addr.
The Management IP Address is the IP addressed used by NorthStar Planner to discover the device.
Interface Administrative status (active, down, or unknown)
The address of the physical interface, based on intfmap NorthStar Planner file.
Any associated aggregated link, such as PortChannel or Bundle-Ether
he physical interface bandwidth, for example, 100.0M
IPv6 address information (based on NorthStar Planner intfmap file)
MTU information (based on NorthStar Planner intfmap file)
The Physical interface media type, for example,
Interface Operational Status (active, down, or unknown)
Switchport mode for layer 2 interfaces, for example, access or trunk
List of VLAN’s for this physical interface, for example, “22 100-102 105-108”