Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?


Simulation Scenario Report Options


To set the report options, select the Report Options tab. The Simulation Scenarios window Report Options tab is displayed as shown in Figure 1.

Figure 1: Simulation Scenarios Window Report Options Tab
Simulation Scenarios Window Report
Options Tab

Table 1 describes the available options.

Table 1: Simulation Scenario Report Options



Generate Peak Group Transit Statistics

Records the maximum number and bandwidth of tunnels transiting through a topology group.

Include Simulation Events for all Periods in Peak Link Utilization Report

In the Peak Link Utilization report, information is provided regarding the event triggering the peak link utilization, indicating which failure type triggered the peak link simulation (for example, node, link, or facility) and the name of the element. If this option is not selected, the simulation event is reported only for the planned period and worst failure scenario among the periods of the traffic load file. If this option is selected, the simulation event is also displayed for all of the individual periods (up to 24).

Generate SRLG and Up-Down Sequence for use in Upper Layer

This generates a report, UPDOWN.runcode, that lists the tunnels that went down during the simulation. This report is often used as an Up-Down Sequence File in an upper layer network in which the tunnels of the lower layer network are translated into links in the upper layer network. Thus, the tunnels that are reported as being down in the UPDOWN.runcode report can be read in as downed links in a custom failure simulation script for an upper layer network. Additionally, an SRLG file is created, based on the set of tunnels of the lower layer (links of the upper layer) that go down together.

Generate Detailed Reroute Report

Report detailed information about tunnels that rerouted during the failure simulation.